How to use


The NasoNeb® Sinus Therapy System was inspired by Healthcare Professionals like ENTs, Allergists, and Pharmacists to deliver nasal safe solutions to the nasal and sinus cavities.

Its unique and deep delivery is effective for gently depositing the solution* of your choice to where it’s needed the most! The NasoNeb® System is fast, simple to use, and easy to clean.

* for medication delivery please seek guidance and a prescription from a Doctor.

For irrigation or cleansing, fill the cup with saline or NasoNeb® Moisturizing Nasal Solution halfway to the first line on the bottom of the cup

For medicine delivery, follow the instructions from your Doctor

Put the cup insert into the cup and place the cup assembly into one nostril, aim it straight in or slightly away from the septum (the middle of your nose that divides your nostrils)

Turn the compressor on

Turn off the compressor when empty

Repeat the above steps for the other nostril

You may need to tilt your head more or less to find the best angle for your nose

You may need to adjust the location of the tip forward or backward to find the best location for medication delivery

Stopping after the first few seconds to blow your nose may improve delivery

Each session with the System can be as quick as 30 – 60 seconds for each nostril. This depends on you and how much solution you add to your NasoNeb cup before starting your session. You’ll know when a session is over, as there won’t be any liquid left in the cup.

Be sure to follow amounts guidelines provided by your Physician for medications or enclosed with our moisturizing saline solution instructions.

It’s quick and easy if you follow the steps below:

Make sure that the device is turned off and unplugged before cleaning

Disconnect the cup from the tubing and compressor
a. Never immerse the compressor in water to clean

Ideally over a sink, remove the cup insert from the cup

Then, wash both the cup insert and cup with soapy warm water

Wipe the tubing and compressor with a clean damp cloth

Finally, leave out to dry

Caution: You may rinse the cup and insert with hydrogen peroxide or isopropyl alcohol. Avoid the use of harsh detergents or cleaning agents. These may damage the plastic components, cause fogging or other undesirable effects. Do not wash in the dishwasher.

Caution: Do not allow water to enter the supply tubing

Tip: If water enters or condensation forms in the supply tubing, connect one end of the supply tubing to the compressor and run the compressor until the water condensation evaporates.

The compressor has a filter installed in the filter holder – which looks like a small switch beside the tubing holder. Please be sure to check the filter every 6 months, for optimal NasoNeb® System use. If it’s dirty, replace the filter.

Pull the filter cover out of the compressor (the cover pulls straight out)

Remove the filter from the cover

If the filter is discolored, replace with a new filter, otherwise, put filter back into the filter cover

Insert the filter cover back into the compressor

Note: There are additional filters included in the system. Or if you ran out, additional filters can be purchased on our Products page or the retail location you purchased your system from.

You can share the compressor but cannot share the cup and tubing to avoid the risk of infection from others.

The cup and tubing set is available for purchase on our Products page.

With good cleaning practices (as seen above), it’s recommended that the cup & tubing you use for the NasoNeb® System be replaced every 6 months. This helps to keep the System running smoothly and follows good nasal hygiene practices.

No problem! The NasoNeb® Team is ready to help you out with your concerns.

Look at the following guidelines to help you find out what’s going on:

  • Is the compressor plugged into an outlet? Ensuring proper connection to the device is a great start
  • Are there other nearby outlets to try/test the compressor connection? It’s important to make sure that a fuse or circuit breaker hasn’t been blown out
  • If you’ve tried all the steps above please contact our Team via email at  and we’ll be glad to further assist you

Make sure the nozzle is inside the nostril before you turn the device on

Turn the device off before removing the nozzle from your nostril

Yes, some liquid dripping is normal.

Usually, this happens when the cup is filled with large amounts of liquid to begin with. During the use of the NasoNeb® System, ensure that the cup isn’t pointing towards the septum of your nose and continue to run the device until all the liquid is gone from the cup.

If you want to maintain a clean and clear nose:

  • It’s recommended that you use 1ml – 3ml of commercially available nasal safe Saline.

For infections, chronic sinusitis, and more:

  • It’s recommended that you use the dosage of medicine, as prescribed by your Doctor.

When using the NasoNeb® System, it’s recommended that you use the correct amount of solution needed for your current allergy, sinus, cold, or flu concerns.

If you’re using medicine, as prescribed by your Doctor, please follow their proper use guidelines or ask your local pharmacist for assistance.

No. Other device accessories are not compatible with the NasoNeb System.

For instance, a pulmonary nebulizer may not be modulated for the correct nasal air flow. Similarly, tubing and cups from other manufacturers units may not be compatible enough to meet the requirements for fast, controlled, and appropriately deposited solutions or medicine in the nasal cavities, as the proprietary NasoNeb Cup and Tubing.

Did you know that irrigation systems may irritate or strip important mucous membranes within nasal sinuses?

In addition, only saline therapies can be delivered through the irrigation system, while NasoNeb System offers both drug delivery as well as a variety of OTC therapies, including saline and moisturizing treatments.

General F.A.Q.

Any items related to the NasoNeb® System – such as the compressor, replacement cup and tubing, moisturizing solution, and kits can be purchased from our website at!

Simply check out our Products section above and you can see our full line of products. 

The NasoNeb® Team works hard to ensure that all products ordered from our site are generally shipped on the next business day from the date of purchase. Based on our current shipping partners, it is estimated that you can receive your order(s) from 1 to 10 business days from the date of purchase.

Currently, the NasoNeb® System Compressor is covered by a 2-year warranty period against any defects on the material or function of the device from the day it was purchased.

The System Cup and Tubing hold a 3 month warranty against any defects on the material or function of the item(s) from the date of purchase

At the moment, all products purchased from our website are subject to a 30-day return policy.

We love to hear that you’re interested in our NasoNeb® products for great nasal care, however, we only ship products purchased on to Switzerland at this time.

NasoNeb® Systems may be available in other jurisdictions outside Switzerland through other distributors.

Don’t worry though, if you want to have access to our products, simply send us an email at with your location and the NasoNeb® Team will let you know where our products are available near you. 

As our mission to provide a great customer experience, we strive to ship orders received between 11am the previous business day and 11am the current business day, same day.

If you need to change your order, please email as soon as you decide to change your order and the NasoNeb® team will be happy to help! 

If you’ve placed an order via our website, we will automatically send you confirmation after placing your order.

If you’ve placed an order via the website, please email .

The NasoNeb® team are strong advocates for a great customer experience! That being said we also deal with high volumes of orders and inquiries, on a daily basis. So, we please ask that you give us at least 24hrs in order to get back to you via email or a phone call.